5L stirred pressure reactor na may drain valve at relux
*Dami ng reaktor: 5.0 litro Mga Tampok: Nilagyan ng flux condenser, rupture buristing disc device. balbula ng alisan ng tubig, balbula ng presyon sa likod, balbula ng mataas na temperatura, sensor ng presyon; *Lab pressure reactor/ 5liters pressure reactor/ pressure autoclave na may drain valve/Lab reactor na may condenser/Reactor na may drain valve/Reactor na may refluxer/Lab reaction autoclave/ Lab pressure autoclave reactor/ stirred pressure reactor/ Lab pressure reactor na may panlabas na condenser/ 5liters reactor/ 5liters pressure reactors/ 5L pressure reactors
- HXCHEM
- CHINA
- 20 ARAW
- 10 SETs/MONTH
Mga Detalye
5L stirred pressure reactor na may drain valve at relux
Dami ng reaktor: 5.0 litro
Presyon: -1 (FV) hanggang 100 bar
Temperatura: 20 °C hanggang 400 °C
materyal: Hindi kinakalawang na asero 304/316
Mga tampok: Nilagyan ng flux condenser, rupture bursting disc device.
Drain valve, back pressure valve, high temperature valve, pressure sensor;
Mga tampok
Flat na takip ng takip: Nakaayos
Uri ng pagsasara: Uri ng flange na may pagsasara ng bolts
Shaft seal: Magnetic coupling drive
Reactor vessel: Nakaayos
Paraan ng pag-init: Pagpainit ng dyaket ng langis
Bottom valve: Walang dead zone drain valve;
Kontrol: Kontrol sa temperatura ng PID.
Mga karaniwang pagtutukoy
GSH model laboratory pressure reactor standard na detalye bilang kapwa:
| Model No. | GSH-0.1 | GSH-0.25 | GSH-0.5 | GSH-1 | GSH-2 | GSH-5 |
| Nominal kapasidad | 100ml | 250ml | 500ml | 1litro | 2litro | 5litro |
| Max Working Pressure | Standard 100bar; Max pressure hanggang 350bar | |||||
| Temperatura sa Paggawa | Karaniwang 350°C；Hanggang 500°C | |||||
| Bilis ng Paghalo | 0-1500rpm | |||||
| Power motor | 150W | 150W | 150W | 0,2KW | 0,2KW | 0,6KW |
| Värmekraft | 1KW | 1KW | 1KW | 2KW | 2KW | 4KW |
| Material | SS304, SS316 eller andra legeringar (Titan, hastelloy, Inconel, Nickel, etc) | |||||
| Uppvärmningsmetod | Standard elvärme (termisk oljeåtervinning, fjärrvärme tillval) | |||||
| Kyl | Interna spiralspolar（valfritt） | |||||
| Laddningsmetod | Upptömning med tryck eller tömning med bottenventil | |||||
| Omrörningstyp | Propeller, paddeltyp, turbin, ankartyp, gasinduktion, helixtyp, etc. | |||||
| Kontrollpanel | Temp.display och kontroll, noggrannhet 1℃, Visning och kontroll av omrörningshastighet Pekskärmsprogramkontroll (tillval) | |||||
| Standardbeslag | Tryckmätare, termoelement, central omröringsport Vätskeinlopp/provtagningsport med nålventil och dopprör och gasinlopp med nålventil Säkerhetsbrottskiva: Intern kylning Spole (valfritt); Fast utfodring plusg(Valfritt) | |||||
Produktsortiment
